CQC recently published a notice on the implementation of new standard, GB 31241-2022 “Technical Specifications for Safety of Lithium-Ion Batteries and Battery Packs for Portable Electronic Products” (hereinafter referred to as "New Standard"). The new standard was released on December 29 of 2022, and will be implemented on January 1 of 2024 replacing GB 31241-2014 (hereinafter referred to as “ol..

As outcomes of consultation on 37/2022 (Proposed Changes to Radiocommunications Equipment Regulation), ACMA made 4 Legislative Instruments: ▷ the Radiocommunications Equipment (General) Amendment Rules 2023 (No.1) ▷ the Radiocommunications (Low Interference Potential Devices) Class Licence Variation 2023 (No.1) ▷ the Telecommunications Legislation Amendment (Significant) Instrument (No.1) 2023 ▷..

In 27th February 2023, TEC notified that the Security Testing under MTCTE will become mandatory from 1st July 2023 for “Wi-Fi CPE” and “IP Router" product categories. The WiFi CPEs are the equipment that are used or deployed at customer premises in telecom networks for providing internet connectivity to end users, which include WiFi Routers, WiFi Modems, Broadband Modems with WiFi facility, Cabl..

On February, MTIT in Yemen has resumed the issuance of type approvals after months of suspension. Unfortunately, MTIT in Yemen didn’t release any official statement, but this news is the result of our regular follow-up and communication with the MTIT in Yemen. We also have received the first type approvals from Yemen for some of our pending applications. As proof of the resumption of type approv..

The Council of Ministers of the Republic of Belarus (the Council) has issued Resolution No. 916, which suspends the norms of the Resolution No. 849. According to the new Resolution, mandatory requirements for energy efficiency in Belarus (clause 3 of the Resolution No. 849) are suspended from January 01, 2023 for an indefinite period, until the Council’s further decision. Therefore, from January..

MIC has issued Circulars No: 24/2022/TT-BTTTT, which promulgate the National Technical Regulation on electrical safety for telecommunications and information technology terminal equipment (QCVN 132:2022/BTTTT). According to the circulars, the new safety standard shall be mandatory from January 1, 2024. Therefore, SDoC according to the standard shall be required for products in scope of it from t..

BIS has issued guidelines for implementation of parallel testing of electronic products covered under the Compulsory Registration Scheme (CRS) of BIS. Accordingly, a product & its component subject to BIS could be tested at the same time if the component does not have BIS approval. Under parallel testing, the lab will test the first component & issue test report. This test report number along-wi..

The Low Voltage Switchgear product listed in the following table had been included in the BIS mandatory certification list under Electrical Equipment (Quality Control) Order, 2020 with the deadline of implementation on November 11, 2021. NO. Electrical Equipment (Goods and Article) Indian Standards 1 Low - Voltage switchgear and controlgear: Circuit - Breakers IS/IEC 60947 : Part 2 : 2016 2 Low ..

TDRA has notified that it has updated and issued the Conformity (Type Approval) Mark according to the Type Approval Regime, as follows: Accordingly, telecom equipment suppliers must adhere to using the updated conformity (Type Approval) mark sent by TDRA, which could be downloaded in the online system. It should also be noted that according to the Telecommunications Equipment Type Approval Polic..

New standard in the CB scheme on 19/12/2022 The following standard has been added to the CB Scheme: OFF 62040-1:2017/AMD2:2022 New standards in the CB scheme on 16/12/2022 The following standards have been added to the CB Scheme: MED 60601-2-45:2011/AMD2:2022 MED IEC 60601-2-54:2022 CBTL CATARC Automotive Test Center (Guangzhou) Co., Ltd. CBTL CATARC Automotive Test Center (Guangzhou) Co., Ltd. ..